‘Takt Time’ for Apple’s App Store and for Healthcare

28
3

Sunday, I read this New York Times article about Apple's “App Store” for the iPhone and iPod Touch (I've been a pretty happy iPhone user for the past three months after switching over from BlackBerry).

I'm going to try to use this example to teach about two concepts that can be used in virtually any process – “takt time” and cycle time — including some questions for healthcare.

Some details of Apple operations came out through filings made in response to the controversy over Apple not carrying the “Google Voice” app and an FCC investigation. The article unveils:

For example, Apple receives 8,500 new applications and updates to applications each week. The company employs a team of 40 full-time trained reviewers, and each application is independently evaluated by two separate reviewers before getting a green light.

Takt is a Lean concept that comes from a German word. If you're a musician, you recognize the “tt = 120” designation to mean that “takt time is 120 beats per minute.” You can think of takt as the tempo of a process. And the definition starts with the customer – what is the pace of customer demand?

Starting with takt in mind (again, focusing on the customer) is the first step in making sure that your processes can meet your customer's needs. This concept can be applied in automobile manufacturing (that's the rate of customer demand for Priuses?) or even in medical settings (what's the demand for “blood draws” to collect testing specimens from patients?)

The basic formula is this:

Using the data from the article, I am assuming the following:

  • I will assume the 40 FTEs work a full day (7.5 hours of work after lunch and breaks)
  • If they have 8,500 apps each week and there are two independent reviews, that demand is actually 17,000 inspections per week = 3400 inspections per day assuming a 5-day work week.
The numerator of the equation can be expressed in minutes by taking 7.5 hours x 3600 sec/hr = 27000 seconds. For the moment, the fact that we have 40 FTEs is irrelevant, because we are calculating the DEMAND rate (takt time).
So we calculate takt as:

7.94 seconds? How in the world can they do an inspection of an application that quickly?

Well, they don't have to work that quickly. I'll explain.

“Cycle time” is a term that means how long it takes to do a repetitive job each time. If you are writing three blog posts in a row, the cycle time is the time required to write one of them. (More on the term “cycle time” here).

For any process to meet demand, the total cycle time must be faster than the takt time. This means a smaller number: a cycle time of 10 minutes is OK if takt is 15 minutes, for example.

If Apple has 40 FTEs working on these application inspections, then each doesn't have to get the work done in 7.94 seconds. Each one can take 317.6 seconds, at most, as shown below. If they take longer, then the work won't get done and inventory of un-inspected (and un-approved) applications will grow forever.


Five minutes doesn't seem very long to inspect an application, does it? Maybe a lot of them are just updates that don't take as long to inspect?

In the physician example, if takt time = 5 minutes (a patient arrives every five minutes), and one physician requires a cycle time of 10 minutes, then you need 2 physicians to keep up with customer demand. This keeps takt and cycle in balance. We can get our work done.

Do you use an approach like this? One potential problem is that this approach assumes customer demand is equal and constant across a period time. We know that's not typically true in healthcare. If you have, on average, a patient arriving every 5 minutes, but four arrive at once, you are bound to have some patient waiting. That's one reason why it is important to “level load” demand where you can (a subject for another post, I guess).

In the laboratory testing examples, if we have to draw blood from 180 patients for testing before morning rounds, and we have three hours to get this done (10,800 seconds), then the take time for collecting specimens (and for testing specimens) is 60 seconds. This is an example where we *can* level out the work over the three hours (we don't have patients arriving randomly).

If drawing blood from one patient (and walking to the next) takes, on average, five minutes –> how many phlebotomists do you need at minimum?

I haven't seen too many labs (or other healthcare settings) use math like this to even estimate staffing levels. Have you? Is this a better method than using benchmarks or budgets? Is this method practical, even given some real world variation? Even if you say “no,” does the explanation make sense?

Subscribe via RSS | Lean Blog Main Page | Podcast | Twitter @markgraban

Please check out my main blog page at www.leanblog.org

The RSS feed content you are reading is copyrighted by the author, Mark Graban.

, , , on the author's copyright.


What do you think? Please scroll down (or click) to post a comment. Or please share the post with your thoughts on LinkedIn – and follow me or connect with me there.

Did you like this post? Make sure you don't miss a post or podcast — Subscribe to get notified about posts via email daily or weekly.


Check out my latest book, The Mistakes That Make Us: Cultivating a Culture of Learning and Innovation:

Get New Posts Sent To You

Select list(s):
Previous articleJerry Jones is NOT a Lean Thinker, Apparently?
Next articleTwo Types of Cycle Time = Confusing
Mark Graban
Mark Graban is an internationally-recognized consultant, author, and professional speaker, and podcaster with experience in healthcare, manufacturing, and startups. Mark's new book is The Mistakes That Make Us: Cultivating a Culture of Learning and Innovation. He is also the author of Measures of Success: React Less, Lead Better, Improve More, the Shingo Award-winning books Lean Hospitals and Healthcare Kaizen, and the anthology Practicing Lean. Mark is also a Senior Advisor to the technology company KaiNexus.

3 COMMENTS

  1. I've used a similar approach. We set up a claims processing process linearly and staffed each activity based on TT estimates. But we bombed out in the beginning. Guess why?

  2. Another application of the math you present is commonly expressed as:

    CycleTime/TaktTime = #operators

    We have a complex mix of cycle times for different products, but using this calculation for weekly planning can get an aggregate number of people required. This allows us to interpret work as # of people and strive to level it from week to week to keep workforce stable (and happier as a result). Not to mention satisfying demand without stress or surprises.

    -ALB

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.